Wooden Spoon Hot Pressing Machine
(1) Machine Technical Data
Name: Wooden Spoon Fork Pressing Machine
Type: 1 person operation , manual type
Power: 2.4 KW
Working Voltage: 220V, 50HZ (Single phase)
Machine Size: 1440*450MM*1270MM
Working Pressure: 0.4 to 0.8 Mpa
Mould equipped : 2 PCS
Weight : 180 KGS
Remarks: Should be used with air compressor
The pressing time (including mould feed, pressing and back), each time need about 15 seconds.
If the worker can putting the flat wooden spoon into mould quickly and make the time efficiency, each minute can press 4 times.
Our following calculation is based on pressing three time per minutes.
160mm wooden spoon, if each minute press 3 times ,
42 PCS per mould*3 times*60mins* 8hours=60,480 PCS per 8 hours.
140mm wooden spoon, if each minute press 3 times ,
44 PCS per mould*3 times*60mins* 8hours=63,360 PCS per 8 hours.
Our Working Time: 9:00 a.m to 18:00 p.m (China Time)
Our Whatsapp(mobile) : 0086 186 5710 6860
Wechat ID: ilikechanging
Email: firstname.lastname@example.org , email@example.com (Welcome to email us at any time)
We will reply your email within 24 hours.
Contact Person: Angel Zhou
Wooden Spoon Machine Manufacturer
Wooden Fork Machine Supplier
Wooden Knife Making Machine
Automatic Wooden Spoon Making Machine