Wooden Veneer Making Machine for Long Length Wood
Length of log
Processing log diameter
Residual minimum diameter
Single and double roll diameter
Single roller, double roller Φ125
Working thickness range
main line speed
m / min
Total motor power
Single roller 7.5KW, double roller 7.5KW*2
Servo feed 11KW, 1.5KW transmission
Guillotine servo 2.2KW, electric ramming shaft for pressing
Size（L* W* H）
Main features of the product:
1. This machine is suitable for processing wood with a diameter of 500mm and a length of 1300mm.
2. The knife table automatically rotates, and the knife edge is automatically adjusted.
Compared with ordinary machines, the flatness and uniformity of the plate are greatly improved.
3. On the basis of integrating other models, this product adopts servo control system and precision screw
feed to make the product performance more stable.
4. Utilizing the large gear curve feed and the feed method, the uniformity error of the veneer is about 0.1mm
under the normal peeling condition. When the wood is not round, it can be used to cut thick plates,
and when the diameter is small, it can be quickly converted into thin plates without breaking the knife.