1. put the knife on the knife table, adjust the probe capacity of the tool is about 0.5-1.0cm, the two ends of the knife to detect the same amount, can be fine-tuned with top wire. Connect the magnetic switch of the electromagnetic device button so that the knife is adsorbed on the knife table.
Adjust the position of the grinding wheel and blade angle, if the blade is found to be in contact with the grinding wheel, should turn into the knife handwheel, so that it separates.
2. Connect the power supply, turn on the power switch, and the machine goes into normal working condition.
3. turn into the knife handwheel, so that the blade slowly and mean speed into the forward, until contact with the grinding wheel, adjust the blade and grinding wheel contact tightness, so that the grinding wheel and blade can work very well.